• Egraflex Steelflon Gaskets

Egraflex Steelflon Gaskets

Concerned about the environment, Coestan offers a sealing solution with the minimum risk of leakage and CO2 emissions. The Steelflon Egraflex gaskets are composed of multilayers of graphite of very high purity and stainless steel, with a PTFE finish and all without any adhesive. These gaskets offer excellent reliability in high temperature ranges and guarantee the requirements required for environmental protection and plant safety. The result is a gasket based on the multilayer graphite of Sigraflex MF, manufactured by SGL, with an inner flange and with a PTFE layer on each face to which a specific pressure is applied to encase the corrugated geometry of the joint and seal all the int layers errons of it. The PTFE finish ensures easy assembly and replacement, as it prevents adhesion to the flange face; the gasket can be removed without leaving any residue and the flange does not have to be disassembled for cleaning the sealing surfaces. On the other hand, the structure of the joint prevents it from absorbing water and prevents problems that occur in the graphite joints that are moistened. Steelflon Egraflex gaskets are available in thicknesses from 2 to 4 mm. We have standard dimensions in stock, for special measures see us the minimum delivery time. You can view the catalog of Egraflex Steelflon gaskets

Ask for information

Concerned about the environment, Coestan offers a sealing solution with the minimum risk of leakage and CO2 emissions.  The Steelflon Egraflex gaskets are composed of multilayers of graphite of very high purity and stainless steel, with a PTFE finish and all without any adhesive. These gaskets offer excellent reliability in high temperature ranges and guarantee the requirements required for environmental protection and plant safety. Let's look at the comparison of the following table of the main products for high service temperatures:

The result is a gasket based on the multilayer graphite of Sigraflex MF, manufactured by SGL, with an inner eyelet and with a PTFE layer on each face to which a specific pressure is applied to encase the corrugated geometry of the joint and seal all the int layers errons of it. The PTFE finish ensures easy assembly and replacement, as it prevents adhesion to the flange face; the gasket can be removed without leaving any residue and the flange does not have to be disassembled for cleaning the sealing surfaces. On the other hand, the structure of the joint prevents it from absorbing water and prevents problems that occur in the graphite joints that are moistened.

Egraflex Steelflon gaskets have the following approvals

  • TA-Luft
  • Fda
  • Bam
  • Dvgw
  • VCI Guidelines
  • Leak tightness and strength validations according to DIN EN 1591

They are available in thicknesses from 2 to 4 mm. We have standard dimensions in stock, for special measures see us the minimum delivery time. You can consult the catalogue of The Egraflex Steelflon gaskets.

Other products

Flat gaskets with inner or outer metallic eyelet

Ir al producto

Metal Jacketed Gaskets

Ir al producto
show more